Validity of the Beta Method to determine pile damage
Titel |
Validity of the Beta Method to determine pile damage |
 SW2022 Validity of the Beta Method to determine pile damage |
Author(s) |
Verbeek, Bielefeld |
|
Year |
2022 |
|
Language |
English |
|
Where |
11th Int Stress Wave Conference, Rotterdam, The Netherlands |
|
Cite as |
Verbeek, G.E.H., & Bielefeld, M.W. (2022, September 20). Validity of the Beta Method to determine pile damage. 11th International Conference on Stress Wave Theory and Design and Testing Methods for Deep Foundations (SW2022), Rotterdam, The Netherlands. https://doi.org/10.5281/zenodo.7148261 |
ABSTRACT:
In 1979 the Beta Method of pile integrity was published. The basic idea behind this method is that stress waves propagating through a foundation pile will be reflected on cracks in concrete piles. As the crack becomes more extensive, so do the reflections. In the ultimate situation of a fully cracked pile, no waves will travel through the crack and the stress wave will be fully reflected. The Beta Method is then calculating the reflection rate (reflected as percentage of the original peak force) and the outcome is presented as a reliable integrity indicator. However, from both theory and practical experience it can be shown that applying the beta method to indicate pile damage will give false negative and false positive results. The former is unwanted because sound piles will be rejected, which will cause grief to the piling contractor. The latter will result in the fact that damaged piles are accepted as sound, where that shouldn't be the case, obviously increasing the risk
of failure. The paper will once again illustrate this, through theory as well as practical examples, and then conclude by making suggestions for a practical pile damage assessment on a job site using low strain dynamic testing.
DOWNLOAD:
You can download the entire article here after entering your name and e-mail address:
