RLT on prefab concrete piles of wind turbine foundations in tidal sands in the Netherlands

Titel

RLT on prefab concrete piles of wind turbine foundations in tidal sands in the Netherlands

RLT on prefab concrete piles of wind turbine foundations in tidal sands in the Netherlands

RLT on prefab concrete piles of wind turbine foundations in tidal sands in the Netherlands

Author(s)

Lankreijer, T.; Dijck, F. vanBakker, J.

Year

2022

Language

English

Where

11th Int Stress Wave Conference, Rotterdam, The Netherlands

Cite as

Lankreijer, T., Dijck, F. van, & Bakker, J. (2022, September 20). RLT on prefab concrete piles of wind turbine foundations in tidal sands in the Netherlands. 11th International Conference on Stress Wave Theory and Design and Testing Methods for Deep Foundations (SW2022), Rotterdam, The Netherlands. https://doi.org/10.5281/zenodo.7148990

ABSTRACT:

During pile driving for wind turbine foundations in pre-dominantly tidal sands, unexpected low blow counts as low as one blow per 0.25 m were observed. To restore confidence in the foundation various aspects were investigated. Within the scope of this investigation several rapid load tests (RLT) have been executed in accordance with NPR7201:2017 and ISO22477-10:2016. From these tests it was concluded that the pile bearing capacity was sufficient. The maximum applied test loads, without geotechnical failure occurring, exceeded the maximum pile bearing capacity predicted by the calculation methods of the Dutch geotechnical standard NEN9997-1. Alongside bearing capacity, the dynamic axial stiffness of the pile in unloading – reloading is of great importance in the design of piled wind turbine foundations. A new simple method has been proposed to directly extract the unloading-reloading stiffness from the RLT test.

 


DOWNLOAD:

You can download the entire article here after entering your name and e-mail address:

    Recommended Posts

    Start typing and press Enter to search

    BAM Screw Piles 2.0: Validating Design for 'De Drie Hoefijzers' by Rapid Load TestingThe rebirth of traditional SITinterpretation methods to incorporate engineering judgement in present day data analysis