Reyca

Monitoring Dynamic Settlements

Reyca

Allnamics has developed the Reyca to measure the displacement of a foundation pile during a Dynamic Load Test or a Rapid Load Test.

Displacements during Dynamic Load Tests are often derived indirectly by double integrating accelerations. The integration of minor measuring errors and inaccuracies in the accelerations leads to an exponentially increasing inaccuracy of displacement (because of the double integration). Over time, adjusted signals and data correction gave presentable results, which were accepted. However, experts know that displacements based on accelerations can never be reliable or accurate.

Because of the above reasons, Allnamics developed the Reyca, a dedicated instrument for direct measuring of displacements.

Key Benefits

Self-calibrating
Works under an angle; no leveling required
Laser beam for guiding and aiming
Easy to mount reflector plate on the pile or another moving subject
Monitoring at a distance of up to 35 m for accurate monitoring. Within 15 m, accuracy is doubled
For monitoring high and slow-speed events
Easy to operate with additional software for monitoring and reporting, the Reyca®
Export of data in Excel or CSV format
Supported by the Allnamics Team with more than 50 years of experience

Allnamics' PDR is the wireless data acquisition unit for Static, Rapid and Dynamic Load Testing

Reyca on the job for monitoring high speed displacements

MEASURING PRINCIPLE

The Reyca is based on an optical sensor and a high-speed camera observing the reflections of the Reyca Reflector Plate mounted on the measured object.

The Reyca can be used for:

Rapid Load Tests
Dynamic Load Tests
Pile Driving Analysis
Train Rail Movements
Monitoring of displacements of bridges during train or traffic passage
Tracking of other low and high-speed movements and displacements

Reyca

Self Calibrating

Due to its unique measuring principle, the Reyca is self-calibrating. The calibration is part of every monitoring. As a result, the Reyca setup is not necessarily leveled or pendicular on the measured object or pile.

Allnamics' PDR is the wireless data acquisition unit for Static, Rapid and Dynamic Load Testing

Results

The software exports monitored data in CSV-format for importing and analyzing the data in Excel or other data acquisition packages. The Reyca Software Package presents measured results on the screen as well.

Allnamics' PDR is the wireless data acquisition unit for Static, Rapid and Dynamic Load Testing

SPECIFICATIONS

Model Dist. range Movement range Resolution . Non-linearity Operating range Sample rate Housing (HxDxB) Dust and water Weight	Model-1, update 2020 5 – 35 m 0.03 m/m 0.1 mm (range 15-35 m) 0.05 mm (range to 15 m) 0.4 %/FS -10 to 40 ⁰C 1 to 2000 Hz adjustable 277,3 x 431,7 x 165,6 mm IP 54 resistance app 20 kg