Allnamics started a test series on small diameter piles. The static load tests to be performed are needed to obtain design factors alpha for both shaft friction αs and toe resistance αp. Tests are performed with the Allnamics SLT system.
From October 22-24 the BuildTech Asia is held in Singapore. Allnamics International will present at this exhibition their products and services at a booth in the EXPO Hall 3. Want to visit us? Please let us know.
After several attempts to reach the building location at the North Sea, finally Allnamics were able to monitor the pile driving process during installation of the huge piles as part of the foundation of wind turbines, at an offshore wind farm somewhere near the cost of Scotland. The measurements were performed during driving (PDM – […]
Rapid Load Testing was finally officially introduced into Spain and Portugal with a paper reviewing the technique, approved codes and extended references on comparatives tests. Presented by Nicolas Moscoso, Carlos Fernández Tadeo and Marcel Bielefeld at the conference at Punta Delgado, Azores. Iberic and Latin American market is able to implement this reliable and efficient […]
Firm position of Allnamics in the 10th Stress Wave Conference – ASTM International
Allnamics puts one step forward pile driving concepts on the 10th Stress Wave Conference held in San Diego. Several important subjects were presented such as – Reliability of Dynamic Load Testing by Gerald Verbeek – Rapid Load Test evolution, current state of practice and experiences with StatRapid by Dr. Chew – Rapid Load Testing predictions […]